DOI:

10.37988/1811-153X_2026_1_35

Факторы, влияющие на стабильность ортодонтических мини-имплантатов: обзор

Загрузки

Авторы

  • Ю.О. Тулуп 1, студентка V курса
    ORCID: 0009-0008-5940-3070, AuthorID: 1290837
  • А.И. Абрамова 1, аспирант кафедры детской, профилактической стоматологии и ортодонтии ORCID: 0009-0007-4978-5741
  • О.А. Маланова 1, к.м.н., ассистент кафедры детской, профилактической стоматологии и ортодонтии
    ORCID: 0000-0001-5678-2206, AuthorID: 1030090
  • А.М. Дыбов 1, д.м.н., зав. кафедрой детской, профилактической стоматологии и ортодонтии
    ORCID: 0000-0002-2932-168X, AuthorID: 932767
  • 1 Первый МГМУ им. И.М. Сеченова, 119991, Москва, Россия

Аннотация

В современной ортодонтической практике применяется множество различных видов ортодонтических мини-имплантатов (МИ), которые различаются не только своими качественными характеристиками, такими как размер, материал, вид резьбы, стерилизации и обработки, но и техникой и местом установки МИ, что, безусловно, играет роль в достижении тех или иных целей в процессе ортодонтического лечения. Нами было найдено множество исследований отдельных факторов, влияющих на стабильность МИ и успех их применения. Однако крайне мало публикаций, обозревающих все описанные на сегодняшний день факторы, и нет публикаций, подводящих окончательный вывод по данной теме. Поэтому цель нашего систематического обзора — анализ всех имеющихся на сегодняшний день исследований факторов, влияющих на стабильность и функциональность МИ, а также подведение наиболее полного вывода по данной теме. После тщательного анализа и отбора на соответствие критериям включения и тематике обзора в систематический обзор было включено 50 публикаций.
Заключение. Пол и перфорация верхнечелюстной пазухи не оказывают существенного влияния на стабильность МИ. Возраст, опыт врача, толщина кортикальной пластинки и плотность губчатой кости, сторона челюсти, близость корня зуба к МИ, длина, диаметр и вид резьбы МИ, обработка поверхности МИ, крутящий момент установки, сила и время нагрузки, место установки и гигиена полости рта непосредственно влияют на успех установки и функциональность МИ. Однозначных данных о влиянии материала МИ, использования самонарезающих МИ или протокола предварительного создания отверстия, а также времени начала приложения нагрузки к МИ после его установки не найдено. Для получения определенных выводов требуется проведение дальнейших исследований на эти темы.

Ключевые слова:

ортодонтические мини-имплантаты, стабильность мини-имплантатов, успех ортодонтического лечения, отторжение ортодонтических мини-имплантатов, IZC, BS

Для цитирования

[1]
Тулуп Ю.О., Абрамова А.И., Маланова О.А., Дыбов А.М. Факторы, влияющие на стабильность ортодонтических мини-имплантатов: обзор. — Клиническая стоматология. — 2026; 29 (1): 35—41. DOI: 10.37988/1811-153X_2026_1_35

Список литературы

  1. de Almeida M.R. Current status of the biomechanics of extra-alveolar miniscrews. — J World Fed Orthod. — 2024; 13 (1): 25—37. PMID: 38155064
  2. Shetty S., Ramesh A., Maniyankod S.B., Parveen K., Selvakumar S.G., Mubeen M., Amin V. Comparing the efficiency of infrazygomatic crest (IZC) screws and conventional method for anterior retraction in patients undergoing fixed orthodontic treatment for class 2 malocclusion: A prospective clinical study. — Cureus. — 2024; 16 (2): e54599. PMID: 38524017
  3. Tseng Y.C., Chen H.S., Hsiao S.Y., Hsu K.J., Chen C.M. Effect of microimplant neck design with and without microthread on pullout strength and destruction volume. — Materials (Basel). — 2021; 14 (20): 5991. PMID: 34683583
  4. Inchingolo A.M., et al. Tooth Complications after orthodontic miniscrews insertion. — Int J Environ Res Public Health. — 2023; 20 (2): 1562. PMID: 36674316
  5. Truong V.M., Kim S., Kim J., Lee J.W., Park Y.S. Revisiting the complications of orthodontic miniscrew. — Biomed Res Int. — 2022; 2022: 8720412. PMID: 35958810
  6. Moeini N., Sabri H., Galindo-Fernandez P., Mirmohamadsadeghi H., Valian N.K. Periodontal status following orthodontic mini-screw insertion: A prospective clinical split-mouth study. — Clin Exp Dent Res. — 2023; 9 (4): 596—605. PMID: 37340755
  7. Yildiz M.S., Ulutas P.A., Ozenci I., Akcalı A. Clinical and radiographic assessment of the association between orthodontic mini-screws and periodontal health. — BMC Oral Health. — 2024; 24 (1): 1376. PMID: 39543578
  8. Vale F., Travassos R., Couto I., Ribeiro M., Marques F., Caramelo F., Marto C.M., Spagnuolo G., Paula A.B., Nunes C., Francisco I. Patient›s perspective on miniscrews during orthodontic treatment—A systematic review with meta-analysis. — Orthod Craniofac Res. — 2025; 28 (2): 217—241. PMID: 39377777
  9. Valeri C., Aloisio A., Marzo G., Costigliola G., Quinzi V. What is the impact of patient attributes, implant characteristics, surgical techniques, and placement location on the success of orthodontic mini-implants in young adults? A Systematic Review and Meta-Analysis. — Saudi Dent J. — 2024; 36 (9): 1149—1159. PMID: 39286583
  10. Zhao Y., Jia T., Wang Z. Comparative analysis of anchorage strength and histomorphometric changes after implantation of miniscrews in adults and adolescents: an experimental study in Beagles. — BMC Oral Health. — 2023; 23 (1): 639. PMID: 37670309
  11. Jaramillo-Bedoya D., Villegas-Giraldo G., Agudelo-Suárez A.A., Ramírez-Ossa D.M. A scoping review about the characteristics and success-failure rates of temporary anchorage devices in orthodontics. — Dent J (Basel). — 2022; 10 (5): 78. PMID: 35621531
  12. Zhang S., Wei X., Wang L., Wu Z., Liu L., Yan X., Lai W., Long H. Evaluation of optimal sites for the insertion of orthodontic mini implants at mandibular symphysis region through cone-beam computed tomography. — Diagnostics (Basel). — 2022; 12 (2): 285. PMID: 35204375
  13. Song Q., Jiang F., Zhou M., Li T., Zhang S., Liu L., Pu L., Lai W., Long H. Optimal sites and angles for the insertion of orthodontic mini-implants at infrazygomatic crest: a cone beam computed tomography (CBCT)-based study. — Am J Transl Res. — 2022; 14 (12): 8893—8902. PMID: 36628253
  14. Pan Y., Wei L., Zheng Z., Bi W. An evaluation of bone depth at different three-dimensional paths in infrazygomatic crest region for miniscrew insertion: A cone beam computed tomography study. — Heliyon. — 2024; 10 (3): e25827. PMID: 38352741
  15. Toriya T., Kitahara T., Hyakutake H., Todo M., Takahashi I. Analysis for predictors of failure of orthodontic mini-implant using patient-specific finite element models. — Ann Biomed Eng. — 2023; 51 (3): 594—603. PMID: 36167866
  16. Bungău T.C., Vaida L.L., Moca A.E., Ciavoi G., Iurcov R., Romanul I.M., Buhaș C.L. Mini-Implant rejection rate in teenage patients depending on insertion site: A retrospective study. — J Clin Med. — 2022; 11 (18): 5331. PMID: 36142978
  17. Hasani M., Afzoon S., Karandish M., Parastar M. Three-dimensional evaluation of the cortical and cancellous bone density and thickness for miniscrew insertion: a CBCT study of interradicular area of adults with different facial growth pattern. — BMC Oral Health. — 2023; 23 (1): 753. PMID: 37833666
  18. Mehta S., Arqub S.A., Sharma R., Patel N., Tadinada A., Upadhyay M., Yadav S. Variability associated with mandibular ramus area thickness and depth in subjects with different growth patterns, gender, and growth status. — Am J Orthod Dentofacial Orthop. — 2022; 161 (3): e223—e234. PMID: 34802867
  19. Tavares A., Crusoé-Rebello I.M., Neves F.S. Tomographic evaluation of infrazygomatic crest for orthodontic anchorage in different vertical and sagittal skeletal patterns. — J Clin Exp Dent. — 2020; 12 (11): e1015—e1020. PMID: 33262865
  20. Tarigan S.H.P., Sufarnap E., Bahirrah S. The orthodontic mini-implants failures based on patient outcomes: Systematic review. — Eur J Dent. — 2024; 18 (2): 417—429. PMID: 37848073
  21. Kim H.J., Park H.S. Long-term evaluation of factors affecting removal torque of microimplants. — Prog Orthod. — 2021; 22 (1): 42. PMID: 34778924
  22. Rodríguez-Rimachi M.E., Malpartida-Pacheco M.I., Olazábal-Martínez W.C. Success rate of infrazygomatic miniscrews considering their design and insertion techniques. A review. — Rev Cient Odontol (Lima). — 2022; 10 (3): e117. PMID: 38389546
  23. Tavares A., Montanha-Andrade K., Cury P.R., Crusoé-Rebello I., Neves F.S. Tomographic assessment of infrazygomatic crest bone depth for extra-alveolar miniscrew insertion in subjects with different vertical and sagittal skeletal patterns. — Orthod Craniofac Res. — 2022; 25 (1): 49—54. PMID: 33908170
  24. Sakamaki T., Watanabe K., Iwasa A., Deguchi T., Horiuchi S., Tanaka E. Thread shape, cortical bone thickness, and magnitude and distribution of stress caused by the loading of orthodontic miniscrews: finite element analysis. — Sci Rep. — 2022; 12 (1): 12367. PMID: 35859046
  25. Mohan S., Srinivasan D., Arumugam E., Devasahayam D., Kannan R. Effect of placement angle, diameter, length and bone density on the pull-out strength of orthodontic mini-implants: An in vitro study. — J Orthod. — 2022; 49 (2): 143—150. PMID: 34666551
  26. Du B., Lin Y., Ji M., Yang Q., Jiang J., Wang F., Wang X., Tan J., Jia R., Li J. Effects of exposure length, cortical and trabecular bone contact areas on primary stability of infrazygomatic crest mini-screws at different insertion angles. — BMC Oral Health. — 2024; 24 (1): 924. PMID: 39123162
  27. Palone M., Darsiè A., Maino G.B., Siciliani G., Spedicato G.A., Lombardo L. Analysis of biological and structural factors implicated in the clinical success of orthodontic miniscrews at posterior maxillary interradicular sites. — Clin Oral Investig. — 2022; 26 (4): 3523—3532. PMID: 34837567
  28. Favero R., Fabiane M., Zuccon A., Conte D., Ludovichetti F.S. Maintaining hygiene in orthodontic miniscrews: Patient management and protocols — A literature review. — Dent J (Basel). — 2024; 12 (7): 227. PMID: 39057014
  29. Puls G.L., et al. Insertion torque, flexural strength and surface alterations of stainless steel and titanium alloy orthodontic mini-implants: an in vitro study. — Dental Press J Orthod. — 2024; 29 (2): e2423282. PMID: 38775601
  30. Byeon S.M., Kim H.J., Lee M.H., Bae T.S. Enhancement of bioactivity and osseointegration in Ti-6Al-4V orthodontic mini-screws coated with calcium phosphate on the TiO2 nanotube layer. — Korean J Orthod. — 2022; 52 (6): 412—419. PMID: 36424809
  31. Fukumoto T., Fukasawa S., Yamada K., Nakajima R., Yamaguchi M. Evaluation of the success rate of single- and dual-thread orthodontic miniscrews inserted in the palatal side of the maxillary tuberosity. — J World Fed Orthod. — 2022; 11 (3): 69—74. PMID: 35589502
  32. Ye Y., Yi W., Fan S., Zhao L., Yu Y., Lu Y., Yao Q., Wang W., Chang S. Effect of thread depth and thread pitch on the primary stability of miniscrews receiving a torque load: A finite element analysis. — J Orofac Orthop. — 2023; 84 (2): 79—87. PMID: 34581834
  33. Jedliński M., et al. How does orthodontic mini-implant thread minidesign influence the stability? — Systematic review with meta-analysis. — J Clin Med. — 2022; 11 (18): 5304. PMID: 36142951
  34. Golshah A., Gorji K., Nikkerdar N. Effect of miniscrew insertion angle in the maxillary buccal plate on its clinical survival: a randomized clinical trial. — Prog Orthod. — 2021; 22 (1): 22. PMID: 34337677
  35. Ummat A., Shetty S., Desai A., Nambiar S., Natarajan S. Comparative assessment of the stability of buccal shelf mini-screws with and without pre-drilling- a split-mouth, randomized controlled trial. — Clin Oral Investig. — 2024; 28 (10): 567. PMID: 39365318
  36. Marchi A., Camporesi M., Festa M., Salvatierra L., Izadi S., Farronato G. Drilling capability of orthodontic miniscrews: In vitro study. — Dent J (Basel). — 2020; 8 (4): 138. PMID: 33371233
  37. Samie S., Alavi S., Asadi F., Raji S.H. Effect of steam and dry heat sterilization on the insertion and fracture torque of orthodontic miniscrews. — Dental Research Journal. — 2020; 3: 219. DOI: 10.4103/1735-3327.284729
  38. Ioana T.R., Boeru F.G., Antoniac I., Mitruț I., Staicu I.E., Rauten A.M., Uriciuc W.A., Manolea H.O. Surface analysis of orthodontic mini-implants after their clinical use. — J Funct Biomater. — 2024; 15 (9): 244. PMID: 39330220
  39. Jahanbin A., Ziya F., Bardideh E., Hafez S., Abtahi M. In vitro physical properties and clinical stability of reused orthodontic miniscrews: A systematic review and meta-analysis. — J World Fed Orthod. — 2025; 14 (2): 97—110. PMID: 39472213
  40. Mylonopoulou I.M., Pepelassi E., Madianos P., Halazonetis D.J. A randomized, 3-month, parallel-group clinical trial to compare the efficacy of electric 3-dimensional toothbrushes vs manual toothbrushes in maintaining oral health in patients with fixed orthodontic appliances. — Am J Orthod Dentofacial Orthop. — 2021; 160 (5): 648—658. PMID: 34752255
  41. Zhang B., Huang X., Huo S., Zhang C., Cen X., Zhao Z. Effect of photobiomodulation therapy on mini-implant stability: a systematic review and meta-analysis. — Lasers Med Sci. — 2021; 36 (8): 1557—1566. PMID: 33660109
  42. Figueiredo A.L., Travassos R., Nunes C., Ribeiro M.P., Santos M., Iaculli F., Paula A.B., Marto C.M., Caramelo F., Francisco I., Vale F. Surface treatment of dental mini-sized implants and screws: A systematic review with meta-analysis. — J Funct Biomater. — 2024; 15 (3): 68. PMID: 38535261
  43. Michelogiannakis D., Jabr L., Barmak A.B., Rossouw P.E., Kotsailidi E.A., Javed F. Influence of low-level-laser therapy on the stability of orthodontic mini-screw implants. A systematic review and meta-analysis. — Eur J Orthod. — 2022; 44 (1): 11—21. PMID: 34114609
  44. He Y., Liu J., Huang R., Chen X., Jia X., Zeng N., Fan X., Huang X. Clinical analysis of successful insertion of orthodontic mini-implants in infrazygomatic crest. — BMC Oral Health. — 2023; 23 (1): 348. PMID: 37264370
  45. Tang Y., Lu W., Zhang Y., Wu W., Sun Q., Zhang Y., Liu X., Liang W., Chen S., Han B. Variations in the alveolar bone morphology in maxillary molar area: a retrospective CBCT study. — BMC Oral Health. — 2024; 24 (1): 872. PMID: 39090625
  46. Fang X., Ding H., Fan C., Pang L., Xu T., Liu J., Jiang C. Comparison of mandibular buccal shelf morphology between adolescents and adults with different vertical patterns using CBCT. — Oral Radiol. — 2024; 40 (1): 58—68. PMID: 37773481
  47. Aleluia R.B., Duplat C.B., Crusoé-Rebello I., Neves F.S. Assessment of the mandibular buccal shelf for orthodontic anchorage: Influence of side, gender and skeletal patterns. — Orthod Craniofac Res. — 2021; 24 Suppl 1: 83—91. PMID: 33354889
  48. Wang Y., Sun J., Shi Y., Li X., Wang Z. Buccal bone thickness of posterior mandible for microscrews implantation in molar distalization. — Ann Anat. — 2022; 244: 151993. PMID: 36041697
  49. Gandhi V., Upadhyay M., Tadinada A., Yadav S. Variability associated with mandibular buccal shelf area width and height in subjects with different growth pattern, sex, and growth status. — Am J Orthod Dentofacial Orthop. — 2021; 159 (1): 59—70. PMID: 33221093
  50. Dharmadeep G., Naik M.K., Reddy Y.M., Cheruluri S., Praveen Raj K., Reddy B.R. Three-dimensional evaluation of interradicular areas and cortical bone thickness for orthodontic miniscrew implant placement using cone-beam computed tomography. — J Pharm Bioallied Sci. — 2020; 12 (Suppl 1): S99—S104. PMID: 33149438

Загрузки

Поступила

27.05.2025

Принята

16.01.2026

Опубликовано

31.03.2026